Integrated descaling programme
CAUTION: If the descaling operation is interrupted, there may be damage to the
machine and residue in the water. Allow the descaling programme to run to the end.
It is possible to start the descaling programme of your IMPRESSA J9 in two ways:
- Descaling after a prompt:
Precondition: "Decalcify machine" is displayed. Press the P button. "Maintenance status (1/6)" appears on the display. Press the "Decalcify" button. "Decalcify" appears on the display. Press the "Next" button. Now follow the instructions on the display.
Note: If the descaling operation stops unexpectedly,
rinse the water tank thoroughly.
- Descaling without a prompt:
Precondition: "Please select product" is displayed.
Press the P button. "Maintenance status (1/6)" appears on the display. Press the "Decalcify" button. Now follow the instructions on the display.
Note: If "Decalcify" remains displayed for a long time, this means the descaling programme was started with too much liquid or water was replenished before the water tank was empty.
- Tip: Start the descaling programme again with 0.5 l water. All the water in the water tank is sucked out during the programme. Please do not replenish water until the display prompts you to do so.
If "Decalcify machine is displayed even though the CLARIS Blue filter cartridge is inserted, this means the machine was not changed over to using a filter in programming mode.
- Tip: Remove the filter and run the descaling programme. Then insert a new filter and change the machine over to using a filter.